Electric Vehicle Charging Station Installation Guide
Set up your charger easily with WiseCar. Guidance up to 100 meters is here!
Step 1: Pre-installation Preparation
- Required Materials: WiseCar Charger, copper cable, fuse box.
- Power Control: 40A fuse for 7.4 kW, 40A fuse for 22 kW.
Step 2: Cable and Spacing Selection
Our recommendations for the correct cable cross-section:
| Strength | Distance | Cable Cross-Section | Notes |
|---|---|---|---|
| 7.4 kW (Single Phase) | 0-20 m | 3x6 mm² | Standard |
| 7.4 kW | 20-50 m | 3x10 mm² | Middle range |
| 7.4 kW | 50-100 m | 3x16 mm² | Long distance |
| 22 kW (Three Phase) | 0-25 m | 5x6 mm² | Standard |
| 22 kW | 25-50 m | 5x10 mm² | Middle range |
| 22 kW | 50-100 m | 5x16 mm² | Long distance |
Cable Calculation Tool
Step 3: Installing the Charger
- Mark the wall mounting plate.
- Drill holes and insert the dowels.
- Secure the device.
Step 4: Electrical Connection
Warning: Must be performed by a qualified electrician!
Connect the cables to the terminal blocks (L1, L2, L3, N, PE).
Step 5: Testing and Deployment
- Check the connections.
- Perform a test charge.
Important Notes
1. Keep away from children.
Use cable trays for distances of 2-100 meters.
3- During the installation and use of the device, avoid contact with sunlight. Otherwise, the device will activate its protection system due to overheating.
4. For safety reasons, the power supply to the device must be switched off when it is not in use.